Loading...
Chamber | Specimen Tray and Components |
No.1 : Spray Tower No.2 : Funnel No.3 : V Type Support The V-type support depends on the weight of the specimen,It change into a strong and weak material. Maker = VISION TEC ROK. |
|
---|---|---|---|
After removing the support, spray tower |
Spray Scene |
||
Control Panel | |||
Pressure gauge, regulator Thermometers, timers and various S/W. | |||
Chamber Pressure |
Pressure Gauge |
*Normal range of pressure 0.07~0.17㎫ Maker=PARKER ROK. |
|
Regulator |
(H →When increasing the pressure.) (L →When decreasing the pressure.) Maker=PARKER ROK |
||
Chamber | Over Heat Protector& Earth Leakage Breaker (OHP. ELB) |
No.1 = Chamber O.H.P. No.2 = Saturaton Tank O.H.P. No.3 = E.L.B. Maker =LS ELECTRIC ROK. |
|
Nozzle Inspection Window |
It is possible to check whether the salt water is normally supplied from the salt water tank to the spray nozzle. Maker = VISION TEC ROK |
||
Spray Nozzle |
Nozzle Hole = 0.8 ~1.0Ø *Size and capacity of chamber and size of specimen Depending on the , the size of the nozzle and the quantity attached to it decide. Maker = VISION TEC ROK. |
||
Spray Nozzle components | |||
Salt Water Tank |
Capacity 1.VT-ST100 =80ℓ 2.VT-ST200 =90ℓ 3.VT-ST300-66=120ℓ *Increase Salt Water Tank capacity depending on Chamber size. Maker = VISION TEC ROK |
||
Chamber Heater |
A heater that heats up the temperature in the chamber. Depending on the size and capacity of the chamber, the heaters will be able to the number increases and the capacity increases. Maker = VISION TEC ROK. |
||
Chamber Optional Spec. |
Dust Collector |
of solids or liquids floating in a gas A device that collects and removes particulates. Create a pleasant indoor environment in the laboratory |
|
Section View and Specification. |
Model = MS 0500 Wind Volume = 7 CMM Constant pressure = 150~200mmAq Power = 0.38Kw(0.5HP) Weight = 25kG Filter 1st = Ceramic 2nd=Carbon 3rd=After Filter Maker: AUTO Link ROK. |
||
Touch Screen (Optional Spec.) |
1.The normal temperature in the
chamber is 35±1℃. 2.Detects the temperature in the chamber. Maker = VISION TEC ROK. |
||
Chamber (General Spec.) |
Temperature Sensor |
*Temp.Controller:Computer communi cation capabilities. 800x480 high resolution 7"TFT LCD screen Maker =NEX CONTROL ROK. |
|
Chamber | Ion water manufacture device
After producing 3000ℓ of ionic water,supplement the inner resin |
Depending on the size and capacity of the chamber,the dimension of the cylinder of the device are increased |
|
Control Valve |
Standard Type 1. Max.Pressure : 10.5Bar,150psi 2. Max.Temp : 50℃ (122˚F) 3. Min.Temp : 1℃ (34˚F) 4. Max.Vacuum : 140mmHg 5. Capacity →(8x17) =11 ℓ 6. Out size :220Ø x600mm *Spec. vary depending on the size of the cylinder *Maker =CJK ROK. |
||
Saturator |
Temperature saturator 45±1℃ Maker= VISION TEC ROK. |
||
Depending on the size and capacity of the chamber, the saturator will be able to the number increases and the capacity increases. |
|||
Solenoid Valve Appearance of attached solenoid valve |
Specification No.1=220V 10W, 3/8 inch No.2=220V 5.5W,1/4 inch No.3=220V 8W ,1/4 inch Maker= PARKER ROK. |
||
Solenoid Valve |
*Solenoid valve is a device that opens the valve by the action of an electric current |
||
Chamber Door |
Automatic opening/closing door |
VT-ST100 VT-ST200 VT-ST300-66 →( Manual Door *VT-ST300-86 or Higher Model (Automatic opening/closing door) |
|
For automatic opening/closing doors Air Cylinder |
* Working Type Double-Acting Type 1. Fluid : Air 2. Bearing Pressure : 15Kgf/㎠ 3. Max working pressure : 9.9Kgf/㎠ 4. Min working pressure : 0.5Kgf/㎠ 5. working speed : 50~500mm/s Maker : ISTC ROK. TPC ROK. *The above is the basic type. |
MODEL | VT-ST100 | VT-ST200 | VT-ST300-66 |
---|---|---|---|
Temperature Range | RT ~35℃ (*RT ~ 60℃→Can be changed by customer order=Select Option) | ||
Tester Method | Neutral(35℃±2℃)/CASS (50℃±2℃) Option | ||
Temperature Control | Digital P.I.D. Control | ||
Spray Volume | 1.5±0.5㎖/80㎠/h (Mean Value of 24 Hours Operation) | ||
Material In | PVC 5t | ||
Material Out | SUS 304 | ||
Door | PVC Transparent | ||
Dimension In (WxDxH) | 600 x450 x 450mm | 900 x 600 x 600mm | 1200 x 600 x 600mm |
Dimension out (WxDxH) | 1350 x680 x 1250mm | 1650 x 850 x 1250mm | 1900 x 900 x 1280mm |
Heater Capacity | Chamber:0.35Kw,Saturation Tank:0.5Kw | Chamber:0.7Kw,Saturation Tank:0.5Kw | Chamber:0.9Kw,Saturation Tank:0.5Kw |
Safety Device | ELB.OHP | ||
Power Source | AC220V 1Ø /50/60 Hz | ||
Air Cylinder for Door Open | Option | ||
CASS | Option | ||
Touch Screen | Option | ||
* Other specifications can be made to order * External appearance & type and specifiation may be to change without advance notice to enhance the performance of equipment. |