:

Salt Water Spray Tester	Reliability Environmental Test Measure Equipment
Forced Convection Dry Oven	Hydrogen Embrittlement Relief Oven
A Specimen Pretreatment Device	Other Equipment

·Features

No Transfer of Internal Heat to Outside Offered with Complete Double Heat Insulation Treatment!

1. By using Digital P.I.D temperature controllers provides excellent temperature precision, and can be freely set temperature raising and temperature maintenance.

2. The PID Controller is a multifunctional temperature controller with built-in precise temperature control, Timer, Alarm, Auto Tuning, etc. and display the set temperature (SV), present temperature (PV) at the same time.

3. Auto Tuning : It is an operation function that calculates the PID integer required for optimal control by measuring the thermal characteristics and thermal response rate of various controlled objects on its own, and sets the value produce fast response and stability.

4. The temperature distribution is uniform and the drying time is fast as the air inside the chamber is forced to circulate by the sirocco fan.

5. Perfect double insulation treatment prevents internal heat from being transferred to the external.
Offering even temperature distribution, perfect and safe design.

6. The height of the shelf can be adjusted and additional shelves can be ordered.

7. Time range selectable(4 digits) → 99Hr59Min, 99Min59Sec, 99Day99Hr

8. Automatically return to set mode in case of power failure

MODEL	VT-DO 200
Temperature Range	RT ~ 250°C (It can raise the temperature further by customer order)
Dimension (WxDxH) In (Room Capa.) ℓ	800 x 800 x 1350mm (860ℓ)
Dimension (WxDxH) Out	1500 x 950 x 2300mm
Material In	SUS 304
Material Out	Steel Plate Painting
Temperature Control	Digital P.I.D. Control
Temperature Sensor	K-CA
Temperature Accuracy	±0.1°C
Temperature Stabiltiy	±0.5°C
Temperature Uniformity	±3.0°C
Rate of temperature rise per min.	3.0°C
Insulation	Ceramic wool 100mm
Motor	0.4kW x 2set
Method	Forced Convection Oven (Forced Air Circulation)
Heater Capa	Electric Pipe Pin Heater (1.5Kwx12=18Kw)
Shelves	-
Circulation	-
Recording System	Select Option
Door	Pulling Door( 1 Door)
Sirocco Fan	8"x4"
Power Source / Power Consumption	3ØAC220V or 380V 50/60Hz
Safety Device	1. ELB (Earth Leakage Breaker) 2. OHP (Over Heating Protective Device) 3. EOCR (Electronic Over Current Relay) 4. NFB (No Fuse Breaker) 5. RPR (Rverse Phase Relay)
Accessory	Timer Buzzer A-mater Signal Lamp (3 colors)
Specialties (Select Option)	1. Special dimensions can be ordered separately by the customer. (Test Chamber Size) 2. Special Temp. can be ordered separately by the customer. (Test Temp. Range) * External appearance & type and specifiation may be to change without advance notice to enhance the performance of equipment.

MODEL

VT-DO 200

Temperature Range

RT ~ 250°C (It can raise the temperature further by customer order)

Dimension (WxDxH) In (Room Capa.) ℓ

800 x 800 x 1350mm (860ℓ)

Dimension (WxDxH) Out

1500 x 950 x 2300mm

Material In

SUS 304

Material Out

Steel Plate Painting

Temperature Control

Digital P.I.D. Control

Temperature Sensor

K-CA

Temperature Accuracy

±0.1°C

Temperature Stabiltiy

±0.5°C

Temperature Uniformity

±3.0°C

Rate of temperature rise per min.

3.0°C

Insulation

Ceramic wool 100mm

Motor

0.4kW x 2set

Method

Forced Convection Oven (Forced Air Circulation)

Heater Capa

Electric Pipe Pin Heater (1.5Kwx12=18Kw)

Shelves

Circulation

Recording System

Select Option

Door

Pulling Door( 1 Door)

Sirocco Fan

8"x4"

Power Source / Power Consumption

3ØAC220V or 380V 50/60Hz

Safety Device

1. ELB (Earth Leakage Breaker) 2. OHP (Over Heating Protective Device) 3. EOCR (Electronic Over Current Relay) 4. NFB (No Fuse Breaker) 5. RPR (Rverse Phase Relay)

Accessory

Timer Buzzer A-mater Signal Lamp (3 colors)

Specialties (Select Option)

1. Special dimensions can be ordered separately by the customer. (Test Chamber Size)
2. Special Temp. can be ordered separately by the customer. (Test Temp. Range)

* External appearance & type and specifiation may be to change without advance notice to enhance the performance of equipment.