·Easy to use with touch screens and computerlized control.

※ A Cyclic Corrosion tester is an experimental equipment that simulates the environment or harsh environment that is actually used for development or production across all industries, including automobiles, aviation, electronics, and semiconductors.

It is to verify the durability and corrosivity of the product through this experimental equipment.

Additional environmental conditions include low humidity conditions (5% RH), and additional test conditions include MS600-66,GMW 14872.

Model
1. Standard Type : VT-CCT A
2. Low Temp.Type : VT-CCT B
3. Salt water immerse Type : VT-CCT C


Features


1. Using a “Program Temperature Controller” temperature rasing,maintenance and cooling can be freely set

2. Using a “Recorder”,all data can be archived as a record.

3. 5.7" Color Touch Screen Controller simplifies manual and program operation

4. P.I.D. control enables precise control by applying 16Zone individual control allocation

5. It can be integrate control through RS-232C communication

6. Emergency response through emergency stop switch

7. Basic dual packing system fundamentally blocks leakage of outside air and exposure to high temperature and low temperature of outside walls

8. Uniform temperature distribution with upper discharge and lower suction structures by Sirocco Fan

9. Wetting sensor through 'Gauze' blocks electronic sensor breakage elements

10. Applied corrosion resistant material inside chamber

11. Strengthening corrosion resistance by Teflon coating of components

12. Installing double vacuum heated glass for internal observation when customer's request

13. Power and signal can be applied through the Cable (Access) Port (Hole)

14. Water supply system is 'pipe water ' direct supply type or 'water tank type' can be selected.

15. Efficient equipment operation with a choice of function that suit your environment.


Notes on Selection

1. Size and performance can be adjusted to meet user needs.

2. Users can select their preferred controller or related parts.

3. The above specifications may be changed without notice
to improve performance and functionality.

4. The performance guarantee of the above tester is based on the temperature around the tester at 20±5 and no load.

5. The temperature change rate can be up to 3℃.

6. Shelves are supplied with basic 2 tier shelf.

7. Salt spray test section is applies to the 'salt water spray test 'regulation KS D 9502

8. The salt water spray test section requires compressed air.

9. The CFC FREE refrigerant may be applied according to the user's request.

10. The use of distilled water is recommended for stable operation of the humidifier.